PTFE Thread Seal Tape, due to the special nature of the thread seal will be lasting and resistant to high temperatures and corrosive chemicals. The seal will not harden or become brittle but will remain flexible enough when the seal is opened for maintenance.PTFE Thread Sealant Tape can be used for various media from corrosive chemicals to water and gas to oil, in hydraulics and pneumatics.
PTFE Thread Seal Tape is a thicker, denser, general-purpose thread seal tape that comes in a monstrous 1,429″ roll. That’s 5 times more tape than conventional rolls of low-density thin tapes. Fewer wraps are necessary to affect a leak-proof seal and it applies easily. No waste and no re-taping make sealing joints a breeze.
Thread sealing tape is manufactured from PTFE resin, a polymer consisting of recurring tetrafluoroethylene monomers whose formula is (CF2-CF2)n. It is inert and compatible with a very wide range of materials. Use Blue Monster on threads made from galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, polypropylene, PVC, CPVC, ABS, fiberglass and more.
Specification
Composition: 99.6% PTFE < 0.4%Pigment Color: BlueLength: 1429″Thickness: 0.0035″ +/- 10%Density: 0.8g/cm3Elongation: >100%Tensile Strength: 15N / mm2
Pressure rating: Thread Sealing Tape has been used to seal fittings carrying water and oil at pressures up to 10,000 PSI or 69,000kPa
Note: Pressure ratings are relative to the quality and torque of the fittings and the amount of tape used.
Temperature Range: -450°F to +500°F (-268°C to +260°C) PTFE is completely stable up to +500o F or +260°C. Decomposition is slow up to 750°F or 400°C. Although decomposition will occur on contact with naked flames.
Post time: Jun-01-2020